This ensures that an approval from @cli/code-reviewers can satisfy the
CODEOWNERS requirement for any path, not just the catch-all wildcard.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
The skills-publish-dry-run acceptance test expected 'no skills/ directory
found' on stderr, but the actual error message from discovery is
'no skills found in <dir>'. Update the stderr matcher accordingly.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
- Remove direct opts.client injection in publish; use HttpClient factory
pattern (PR #13168 feedback)
- Rename testName to name in discovery test struct (PR #13170 feedback)
- Use typed struct keys for dedup map with case-insensitive comparison
in deduplicateResults (PR #13170 feedback)
- Simplify remote selection to use Remotes() ordering instead of manual
origin-first logic (PR #13171 feedback)
- Fix push icon timing: show no icon before push, SuccessIcon after
success (PR #13171 feedback)
Closes#13184
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Remove the dead code block that silently swallowed errors from
opts.HttpClient() and opts.Config() when creating an API client.
Instead, create the client with proper error propagation inside the
remote-checks block where it is actually needed.
Changes:
- Remove the error-swallowing client == nil fallback (lines 363-376)
- Create the API client inside the remote repo checks block with
proper error returns from HttpClient() and Config()
- Resolve host from repoInfo first, then fall back to config
- Remove the now-unreachable 'client == nil' early exit before publish
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Like gh pr create, skill publish now automatically pushes unpushed
local commits before creating a release. This prevents the footgun
where a release is created against stale remote state when the user
has local commits that haven't been pushed yet.
The ensurePushed function checks for unpushed commits using
git rev-list @{push}..HEAD. If commits exist or the branch has
never been pushed, it pushes automatically and prints a status
message. This matches the CLI's opinionated-defaults philosophy
of doing the right thing by default.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Replace the hardcoded skills/ directory requirement in the publish
command with the shared DiscoverLocalSkills() function used by install
and other commands. This removes the opinionated restriction that skills
must live under a skills/ directory and supports all discovery
conventions:
- skills/*/SKILL.md
- skills/{scope}/*/SKILL.md
- */SKILL.md (root-level)
- plugins/{scope}/skills/*/SKILL.md
All per-skill validation (frontmatter, spec-compliant naming, metadata
stripping, etc.) is preserved.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Allow installing extensions without being authenticated. The install
command can work with public repositories and local directories without
requiring a login, so the auth gate is unnecessary.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
When a user runs an unknown command that matches a known official
extension (e.g. `gh stack` or `gh aw`), show an install suggestion.
In interactive TTY sessions, prompt the user to install it on the spot.
The official extension registry is hard-coded in pkg/extensions/.
Current entries are github/gh-aw and github/gh-stack. Teams can add
their extensions via PR. Install suggestions use an explicit github.com
host prefix for GHES compatibility.
Refs github/cli#220
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
The parentPath parameter in the contents API path was not URL-encoded,
which would cause failures when paths contain spaces or other special
characters. Apply url.PathEscape() to parentPath, consistent with
the rest of the file. commitSHA is left unescaped since SHAs are
hex-only and never need encoding.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add cmdutil.DisableAuthCheckFlag for --from-local on install so that
installing from a local directory does not require authentication.
This follows the same pattern used by attestation verify for its
--bundle flag.
The --dry-run flag on publish is intentionally left with auth enabled
because dry-run validation includes remote repository checks (security
settings, tag protection, topics).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
- Keep skillName as bare name in JSON output for backward compat;
namespace is available as a separate --json field
- Fix Namespace field comment to cover plugin namespaces too
- Trim /SKILL.md from install path arg to match comment
- Rename acceptance test to skills-install-namespaced since it
tests install disambiguation, not search
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Remove the now-unused newTestGitClient helper that was left behind
after refactoring tests to use initGitRepo directly. This fixes the
golangci-lint 'unused' error in CI.
Co-authored-by: BagToad <47394200+BagToad@users.noreply.github.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Skills with the same name but different namespaces (e.g.
skills/kynan/commit and skills/will/commit) were being collapsed
into a single search result because extractSkillName discarded the
namespace. This also caused deduplicateByName to cap results
across different namespaces as if they were the same skill.
Changes:
- Add MatchSkillPath to discovery package returning both name and
namespace (the existing MatchesSkillPath is kept for compat)
- Add Namespace field to skillResult in search
- Fix deduplicateResults to use repo/namespace/name as the dedup key
- Fix deduplicateByName to cap by namespace-qualified name
- Update table, prompt, and JSON output to show qualified names
- Use skill path for install subprocess when namespace is present,
ensuring unambiguous install of namespaced skills
- Add namespace to --json fields and relevance scoring/filtering
- Add unit tests for namespace dedup, qualified names, and filtering
- Add acceptance test for namespaced skill search and install
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
When a directory argument is provided to `gh skill publish`, the remote
detection now correctly uses the target directory's git remotes instead
of the current working directory's remotes.
Previously, `detectGitHubRemote` used the factory-provided git client
which pointed to the CWD. This meant that running
`gh skill publish /path/to/repo-bar` from inside repo-foo would detect
repo-foo's remotes and potentially create the release on the wrong repo.
The fix copies the git client and sets `RepoDir` to the target directory,
matching the pattern already used by `detectMissingRepoDiagnostic` and
`checkInstalledSkillDirs`.
Co-authored-by: BagToad <47394200+BagToad@users.noreply.github.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
- preview: remove 'fetched > 0' guard so the 512KB size cap applies
uniformly to all files including the first
- update: return skills with corrupted YAML frontmatter with metadataErr
set instead of silently dropping them from scan results
- installer: fail installation when a path traversal is detected in
remote or local skill files instead of silently skipping
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
- Update comment in relevanceScore() from '10 000 points' to '3 000 points'
to match the actual implementation value of 3_000
- Update corresponding test comment for consistency
- Fix typo: 'swaped' → 'swapped' in formatStars comment
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
remove git sha because we only need git tree sha
remove github-owner from frontmatter, and make github-repo support full url. Only support github.com as host, error out otherwise
Cover the three primary discovery entry points with httpmock-based tests.
DiscoverSkills: happy path, truncated tree, no skills, API error, dedup.
DiscoverSkillByPath: path resolution, namespaces, invalid name, missing
directory, missing SKILL.md. DiscoverLocalSkills: convention matching,
root skill, no skills, nonexistent directory.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test InstallLocal public API instead of private installLocalSkill
Replace tests that called installLocalSkill directly with tests through
InstallLocal. Adds coverage for AgentHost+Scope resolution path,
multiple skills, and missing Dir/AgentHost error. Fixes symlink test
to require.NoError on os.Symlink.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test partial failure in concurrent Install
Add test where one of two skills fails (500 on tree fetch). Asserts
that result.Installed contains the successful skill and err wraps the
failed skill name. Fixes test loop to not clear Dir for partial failure
cases.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Refactor update tests to table-driven pattern
Consolidate 16 individual test functions into 3 standalone + 3 table
tests matching cli/cli conventions. Fix ArgsPassedToOptions to use
iostreams.Test() instead of os.Stdout/os.Stderr. Use GitHub-branded
test data. No coverage lost.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add update execution test that verifies SKILL.md is rewritten
All prior update tests used DryRun or hit early exits. New test
exercises the full fetch-and-rewrite path: stale treeSHA triggers
re-download, SKILL.md is overwritten with new content and metadata.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Use heredoc.Doc for multiline SKILL.md strings in update tests
Replace escaped newline strings with heredoc.Doc backtick literals
for readability, matching cli/cli conventions.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add interactive update path tests
Cover confirm-and-apply, confirm-cancelled, and no-metadata prompt
paths in TestUpdateRun. These interactive branches were previously
untested since all prior tests used non-TTY or DryRun.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test no-metadata prompt enrichment through full update path
Add test where a skill with no GitHub metadata is prompted for origin,
user provides owner/repo, skill gets enriched and proceeds through
version resolution and file rewrite. Covers lines 222-224 in update.go.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Replace deprecated cs.Gray with cs.Muted
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test namespaced skill update with --dir base resolution
Cover the filepath.Dir double-up path for namespaced skills (name
contains '/') when using --dir. Verifies the install base is resolved
correctly so the update writes to the right directory.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test install failure during update reports error and preserves file
Cover the path where version resolution succeeds but blob fetch fails
during the actual install. Verifies stderr error message, SilentError
return, and that the original SKILL.md is not modified.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Dedupe resolveGitRoot/resolveHomeDir into installer, rename scanAllHosts
Move ResolveGitRoot and ResolveHomeDir to the installer package to
eliminate duplication between install and update commands. Fix
ResolveGitRoot to check RepoDir before calling ToplevelDir.
Rename scanAllHosts to scanAllAgents to match registry naming. Add
test exercising scanAllAgents via updateRun without --dir.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Use heredoc.Doc for multiline YAML strings across all test files
Convert 13 escaped-newline frontmatter strings to heredoc.Doc for
readability. Applies to discovery, frontmatter, install, update,
publish, and preview test files. Preserves edge-case test strings
and fmt.Sprintf interpolations as-is.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Use git.Client.Copy() instead of struct copy to avoid mutex copy
Fixes go vet 'copies lock value' warnings in publish command where
*git.Client was copied by value to set a different RepoDir. Rename
terse variable names (bc/ic/dc) to branchGit/ignoreGit/dirGit.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Rewrite publish tests: table-driven through publishRun
Consolidate 35 test functions into 2: TestNewCmdPublish (4 cases for
CLI arg parsing) and TestPublishRun (22 cases exercising all behavior
through the command's run function). No individual helper function
tests — every codepath tested through publishRun scenarios.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Remove .gitkeep from acceptance/testdata/skills
Delete the placeholder .gitkeep file from acceptance/testdata/skills. The directory no longer needs a placeholder file to be tracked in the repository.
Rename testPublishGitClient to newTestGitClient
Rename the test helper function testPublishGitClient to newTestGitClient in pkg/cmd/skills/publish/publish_test.go and update all call sites accordingly. This is a purely refactor/name-change with no behavioral changes to tests.
Fix Windows CI: set USERPROFILE alongside HOME in tests
os.UserHomeDir() uses USERPROFILE on Windows, not HOME. All tests
that redirect HOME for lockfile isolation now also set USERPROFILE
to the same temp directory.
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
Use range-over-int in acquireLock retry loop
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test lock acquisition edge cases through RecordInstall
Make lockRetries and lockRetryInterval configurable (package-level vars)
so tests can avoid the 3s retry wait. Add two RecordInstall cases:
- Stale lock (>30s old) is broken and install succeeds
- Fresh lock exhausts retries, proceeds best-effort without lock
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Rename test helpers for lockfile tests
Rename setupHome to setupTestHome and readLockfile to readTestLockfile in internal/skills/lockfile tests, and update all call sites and comments accordingly. This is a refactor-only change to clarify test helper names with no behavior change.
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
Test read() degradation through RecordInstall, delete TestRead
Move corrupt JSON and wrong version cases into TestRecordInstall table.
RecordInstall calls read() internally, so these exercise the same
degradation paths through the public API. Verifies the lockfile is
rewritten with correct version and new data after recovery.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Fix InstalledAt preservation test to actually prove preservation
Move the update-preserves-InstalledAt case out of the table into a
standalone subtest that reads InstalledAt between two RecordInstall
calls and asserts exact equality. The table version only checked
NotEmpty which couldn't detect if InstalledAt was overwritten.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Merge duplicate plugin test into TestMatchSkillConventions table
The standalone TestDuplicatePluginSkills_DifferentAuthors re-implemented
dedup logic that belongs in DiscoverSkills. Replace with a table case
that tests convention matching only. Dedup is already covered by
TestDiscoverSkills.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Fix broken validateName max-length test case
Replace make([]byte, N) (which produces null bytes) with
strings.Repeat to actually test the 64-character boundary. Add
positive test for valid 64-char name.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Replace name-matching hack with createDir field in TestDiscoverLocalSkills
Use a struct field instead of comparing tt.name to control whether
the test directory is created. Prevents silent breakage if someone
renames the test case.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Improve collisions tests: table-driven FormatCollisions, exercise DisplayName
Convert TestFormatCollisions to table test with nil-input case. Update
single collision case to use different conventions (plugins vs skills)
so DisplayName() logic is actually exercised in the assertion.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add tests for MatchesSkillPath, DiscoverSkillFiles, ListSkillFiles, FetchDescriptionsConcurrent
Also cover previously untested branches: root convention matching,
annotated tag dereference failure, empty tag_name/default_branch
fallbacks, recursive walkTree with subtrees, and skill directory
deduplication.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test full GitHub key stripping in InjectLocalMetadata
Add all 7 github-* keys to the input metadata and assert all are
absent after injection. Previously only tested github-owner and
github-repo removal.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test Serialize trailing-newline addition for body without newline
Add case where body doesn't end in newline and assert the output
has one appended. Previously this branch was uncovered.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test InjectGitHubMetadata with no existing frontmatter
Add case where content has no --- delimiters, exercising the
RawYAML == nil branch that creates frontmatter from scratch.
Also fix test data to use GitHub-branded names.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Convert TestInjectLocalMetadata to table-driven with no-metadata case
Add case for content with no frontmatter, exercising the meta == nil
branch. Aligns with table-driven pattern used throughout.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Replace name-matching hack with useAgentHost field in TestInstallLocal
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add tests for ResolveGitRoot
Cover RepoDir shortcut, nil client fallback, and empty RepoDir
fallback. Skip ResolveHomeDir — it's a thin os.UserHomeDir wrapper
with no logic to test.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Test OnProgress callback in both single and multi-skill Install paths
Cover the progress reporting branches in Install for both the
single-skill fast path (len==1) and the concurrent multi-skill path.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Cover missing InstallDir error branches and malformed URL in registry
Add user-scope-without-homeDir and invalid-scope cases to TestInstallDir.
Add malformed URL case to TestRepoNameFromRemote. Coverage 80.5% → 87.8%.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Rewrite install tests: table-driven through installRun and runLocalInstall
Consolidate 48 individual test functions into 6: TestNewCmdInstall (10
cases for CLI parsing), TestInstallRun (21 cases for remote install
flow), TestRunLocalInstall (10 cases for local install flow), plus
TestIsLocalPath, TestIsSkillPath, TestFriendlyDir for pure input
classification. Delete zero-value Help test. All behavior tested
through public functions instead of calling internal helpers directly.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Fix data race in OnProgress test with atomic counter
The OnProgress callback was appending to a shared slice from concurrent
goroutines. Replace with sync/atomic counter to avoid the race.
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
Add interactive install tests for skill selection, scope, host, and overwrite
Exercise the interactive TTY paths in installRun: MultiSelectWithSearch
for skill selection, Select for scope prompt, MultiSelect for host
selection, and Confirm for overwrite declined.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Exercise skillSearchFunc fully through interactive mock
Update the interactive skill selection test to use 31 skills (exceeding
maxSearchResults cap), include a skill without a description, and have
the mock call searchFunc with both empty and filtered queries. Verifies
the MoreResults count, label formatting, and truncation branches.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Fill remaining install coverage gaps
Add local path detection cases to TestNewCmdInstall. Add interactive
repo prompt, user scope selection, overwrite without metadata, and
single exact match cases to TestInstallRun. Add bare tilde expansion
to TestRunLocalInstall.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Move HOME/USERPROFILE setenv to test loops, remove per-case duplication
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add isTTY field to install test tables, centralize TTY setup
Move TTY configuration from individual opts funcs into the test loops.
Each table case declares isTTY: true/false and the loop sets all three
streams accordingly.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Remove INSTALL_TARGET env var hack from install test
Metadata injection is already proven by installer package tests.
This test only needs to verify installRun orchestrates correctly.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add ScopeChanged: true to all install tests with explicit Scope
Ensures tests simulate the same state cobra produces when --scope is
explicitly provided, preventing silent codepath divergence if the
default scope behavior changes.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Fix assert.Error → require.Error in TestNewCmdSearch
Prevents nil panic on err.Error() if the command unexpectedly returns nil.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Improve preview test quality and coverage
- Fix assert.Error/assert.NoError → require.Error/require.NoError to
prevent nil panics in TestNewCmdPreview and TestPreviewRun
- Add renderAllFiles edge case tests: maxFiles cap (20 files), maxBytes
cap (512KB), and FetchBlob error fallback message
- Replace custom discardWriter with io.Discard
- Use GitHub-branded names (monalisa) in new tests
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
Add search test coverage: rate limits, owner scope, blob enrichment
- Add HTTP 429 and 403+Retry-After rate limit test cases
- Add owner-scoped no-results test (exercises noResultsMessage branch)
- Add blob description enrichment test (exercises fetchDescriptions path)
- Replace custom splitOnSpaces with strings.Fields
- Replace custom discardWriter with io.Discard
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
Remove low-value alias test for preview command
The test only asserts a string literal matches another string literal.
Alias presence is already visible in the command definition.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Replace local pluralize with text.Pluralize
The internal/text package already provides this function via go-gh.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Inline collapseWhitespace — just strings.Fields + Join
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Doc: suggest using go-humanize for star formatting
Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>
Return cmdutil.CancelError on user cancellation in publish and update
Both commands returned nil (success exit) when the user declined
confirmation. The core CLI pattern is to return CancelError so the
process exits with a non-zero status.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Add interactive publish prompt tests and isTTY field
Cover all prompt branches in runPublishRelease:
- Topic confirm + semver tag selection + final confirm (happy path)
- Custom tag input path (select idx=1)
- Final confirm declined (CancelError)
- Immutable releases prompt (enable via PATCH)
Add isTTY field to test table struct for centralized TTY setup,
matching the pattern used in install tests. Add auto-confirm
prompters to existing TTY tests that now need them.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Remove duplicate giturl import alias in publish
The git package was imported twice — once as 'git' and again as
'giturl'. Use git.ParseURL directly.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Fix data race in search enrichment
fetchDescriptions and fetchRepoStars run concurrently but both wrote
to fields of the same skillResult slice elements, triggering the race
detector. Refactor both functions to return index-keyed maps instead
of mutating the slice directly. enrichSkills merges the maps into the
slice after both goroutines complete.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
refactor: remove Claude plugin branding, align with Open Plugin Spec
Replace all 'Claude plugin' references with generic 'plugin' terminology
to align with the vendor-neutral Open Plugin Spec
(https://github.com/vercel-labs/open-plugin-spec).
Changes:
- Rename .claude-plugin/ to .plugin/ (spec §5.1 vendor-neutral manifest)
- Rename claudePluginJSON/claudeAuthor types to pluginJSON/pluginAuthor
- Rename claudeMarketplaceJSON to marketplaceJSON
- Rename generateClaudePlugin to generatePlugin
- Remove 'Claude Code' from plugin-related comments, help text, and flags
- Update install.go plugins/ convention message
Factual host references (Claude Code as an agent name, .claude/skills
directories) are intentionally preserved — those are product names, not
plugin branding.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Remove --plugins flag from publish command
Remove the --plugins flag and all associated plugin generation code from
the publish flow. This was scope creep — the publish command should focus
on validating and publishing skills, not generating plugin
manifests.
Removed:
- --plugins flag and Plugins option field
- generatePlugin, generateMarketplace, buildPluginDescription functions
- pluginJSON, marketplaceJSON, marketplacePlugin types
- Related tests and help text
The install command's ability to discover and pluck skills from plugin-
structured repositories (plugins/ convention) is preserved.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
don't fall back on default branch if you can't fetch latest release
improve search algo by using square rot instead of log for stars, and reduce weight for exact name match
add support for --unpin flag when updating a skill
